Optibrush Entrance Floor Mat

Product Number 7418; 7446; 7424; 7449
Optibrush Entrance Mats are the perfect choice for interior or exterior entrance matting needs. Customise your mat with your choice of logo or artwork to the durable nylon monofibers in up to 2 colours.

DURABLE | Nylon Brush mono fibres make for excellent scraping action.

UV RESISTANT | Solution Dyed fibresrs for 100% UV-resistance.

CHMEICAL RESISTANT | Solution dyed nylon is impervious to bleach.

MADE IN EUROPE | Manufactured in Europe with no minimum order quantities and fast lead times.

FUNCTIONAL | Optional drainage holes allow for excellent drainage.

Recommended for indoor or outdoor commercial use at entryways, lobbies and at welcome desks. They are highly durable and suited to anywhere you want to display your company logo or message to customers, visitors or employees.

60 x 85 cm

75 x 85 cm

80 x 120 cm

85 x 150 cm, 85 x 300cm

120 x180 cm, 120 x 200 cm, 120 x 240 cm

150 x 200 cm,150 x 300 cm

Special sizes available.

Maximum size: 200 x 1000 cm or 240 x 550 cm

  • YARN: Coarse Continuous filament Solution Dyed Nylon.
  • YARN WEIGHT: 1,300 g/m².
  • PILE THICKNESS: 10mm.
  • TOTAL WEIGHT: 5,20 kg/m².
  • PRIMARY BACKING: Polyester Spun bound Non-woven Fabric 120g/m².
  • RUBBER BACKING: 100% Nitrile EXS™ rubber with high UV resistance and high resistance to carbon bleeding. Compression-molded with claw backing for excellent dimensional stability.
  • BORDER THICKNESS: 2.9mm
  • BORDER WIDTH: 1.5cm
  • SIZE VARIANCE: +/- 2%

Optibrush mats can be cleaned in several different ways.

  1. They can be commercially laundered (see Laundering Instructions)
  2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
  3. Cleaned with an extractor, or hosed off as necessary to remove heavy soil.

Hang to dry.Mats should always be dry before they are placed back in service.

  1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
  2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
  3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
  4. Rinse, 2 Min. on a high water level with cold temperature
  5. Rinse, 2 Min. on a high water level with cold temperature
  6. Extract on low speed, 1-2 Min.
  7. Shake out with the drum turning, 1 Min.
  8. Extract, on a maximum of 250G, 3-5 Min.
  9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
  10. Cool down, 5 Min.

Additional Recommendations:

  • It's recommended that Optibrush mats are washed separate from other mats.
  • Optigraphic & Diplomats can be washed together with other SDN mats.
  • For Heavy Soiled Mats, increase temperature up to max. 71°C.
  • Break should not exceed pH of 9,5; use low pH non-ionic detergents.
  • Do not overdry mats; Basket-temperature of dryer should not exceed 82°C.
  • If mats are not dried, final rinse can be increased to 49°C. This will reduce moisture retention following extraction.
  • Lay Mats flat following removal from washer; allow mats to cool before rolling.