UniColor ColorStar Entrance Floor Mat

Product Number 746

ColorStar Unicolor Mats are produced in your choice of single, solid colour from our choice of 66 standard colour options.  The mats are digitally printed on eco-friendly PET carpet.

HIGH-QUALITY PRINT |The custom solid color is digitally printed from 66 standard color options.

LOW MAINTENANCE | Incredible stain resistance, no cross staining, easy to clean.

ECO | Yarn contains 100% post-consumer recycled content.

MADE IN EUROPE | Manufactured in Europe with low minimum order quantities and fast lead times. 

Recommended for indoor commercial use at entrances, lobbies, front desks or anywhere additional traction or moisture control is needed.

60 x 85 cm

75 x 85 cm

85 x 115 cm, 85 x 150 cm, 85 x 300 cm

115 x 180 cm, 115 x 200 cm, 115 x 240 cm, 115 x 250 cm, 115 x 300 cm

150 x 200 cm, 150 x 240 cm, 150 x 250 cm, 150 x 300 cm

200 x 200 cm, 200 x 300 cm

Special sizes available.

Maximum size: 200 x 550 cm.

  • YARN: Continuous filament PET yarn with 100% post- consumer recycled content.
  • YARN WEIGHT: 900 gr/m².
  • STATIC CONTROL: ISO 6356 (2012) Determination of the static electrical propensity - walking test: -0.3 kVolts. Satisfies IBM test requirements.
  • TOTAL WEIGHT: 2.90 kg/m².
  • PRIMARY BACKING: Freudenberg LUTRADUR? Polyester Spun bound Non-woven Fabric 130gr/m².
  • RUBBER BACKING: 100% Nitrile EXS™ rubber for maximum oil resistance, weight reduction, and flexibility. Compression-molded with reinforced borders on all four sides.
  • SIZE VARIANCE: +/- 2%
  • FLAMMABILITY: Passes BS 4790 (1987) determination of the flammability of textile floor coverings: Low radius of effects of ignition.

ColorStar mats can be cleaned in several different ways.

  1. They can be commercially laundered (see Laundering Instructions)
  2. Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
  3. Cleaned with an extractor, or hosed off as necessary to remove heavy soil.

Hang to dry.Mats should always be dry before they are placed back in service.

  1. Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
  2. Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
  3. Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
  4. Rinse, 2 Min. on a high water level with cold temperature
  5. Rinse, 2 Min. on a high water level with cold temperature
  6. Extract on low speed, 1-2 Min.
  7. Shake out with the drum turning, 1 Min.
  8. Extract, on a maximum of 250G, 3-5 Min.
  9. Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
  10. Cool down, 5 Min.

Additional Recommendations:

  • For Heavy Soiled Mats, increase the temperature up to max. 60°C.
  • Break should not exceed pH of 9,5; use low pH non-ionic detergents.
  • Do not overdry mats; Basket-temperature of the dryer should not exceed 82 °C.
  • If mats are not dried, the final rinse can be increased to 49 °C. This will reduce moisture retention following extraction.
  • Lay mats flat following removal from washer; allow mats to cool before rolling.