ColorStar
Product Number 745 (Logo); 746 (Unicolour)
ColorStar Entrance Floor Mats feature your custom logo or artwork digitally printed from our 66 standard colours. The surface is an Eco-friendly, 100% recycled PET carpet bonded to our premium 1.5mm Nitrile EXS™ rubber backing with reinforced 25mm borders.
- HIGH QUALITY PRINT | Logos and designs are reproduced at 76 dpi, making fine details, shading and 3D Images achievable.
- RECYCLED MATERIALS | Yarn contains 100% post-consumer recycled content from recycled bottles.
- DURABLE | Premium Nitrile EXS™ backing and borders offer outstanding lay flat properties and deliver a high performing floor mat.
- WASHABLE | Premium materials ensure mats are fully launderable for extended use.
- FUNCTIONAL | ColorStar offers exceptional stain resistance and ease of cleaning as required.
- FAST LEAD TIMES | Produced within 24-48 hours in a wide choice of standard and custom sizes with smooth or claw backing options available.
Recommended for indoor commercial use at entryways, such as lobbies and foyers or anywhere you want to display your company logo or message to customers, visitors and employees.
?60 x 85 cm
75 x 85 cm
85 x 115 cm
85 x 150 cm
85 x 300 cm
115 x 180 cm
115 x 200 cm
115 x 240 cm
115 x 250 cm
115 x 300 cm
150 x 200 cm
150 x 240 cm
150 x 250 cm
150 x 300 cm
200 x 200 cm
200 x 300 cm
Special sizes available.
Maximum size 200 x 550 cm
- YARN: Continuous filament PET yarn with 100% post-consumer recycled content.
- YARN WEIGHT: 900 gr/m².
- PILE THICKNESS: 11mm.
- STATIC CONTROL: ISO 6356 (2012) Determination of the static electrical propensity - walking test: -0.3 kVolts. Satisfies IBM test requirements.
- TOTAL WEIGHT: 2.90 kg/m².
- PIMERY BACKING: Freudenberg
- LUTRADUR? Polyester Spun bound Non-woven Fabric 130gr/m².
- RUBBER BACKING: 100% Nitrile EXS™ rubber for maximum oil resistance, weight reduction, and flexibility. Compression-molded with reinforced borders on all four sides.
- BORDER THICKNESS: 2.5mm
- BODY THICKNESS: 1.5mm
- BORDER WIDTH: 2cm
- SIZE VARIANCE: +/- 2%
- FLAMMABILITY: Passes BS 4790 (1987) determination of the flammability of textile floor coverings: Low radius of effects of ignition.
ColorStar mats can be cleaned in several different ways.
- They can be commercially laundered (see Laundering Instructions)
- Vacuumed regularly (daily in high-traffic areas; weekly in lower-traffic applications)
- Cleaned with an extractor, or hosed off as necessary to remove heavy soil.
Hang to dry.
Mats should always be dry before they are placed back in service.
- Flush, 2-3 Min. on a medium water level with a maximum temperature of 49°C
- Flush (optional), 2-3 Min. on a medium water level with a maximum temperature of 49 °C
- Break, 2-3 Min. on a high water level with a maximum temperature of 49 °C
- Rinse, 2 Min. on a high water level with cold temperature
- Rinse, 2 Min. on a high water level with cold temperature
- Extract on low speed, 1-2 Min.
- Shake out with the drum turning, 1 Min.
- Extract, on a maximum of 250G, 3-5 Min.
- Dry (optional), 5-10 Min. with a maximum basket temperature of 82 °C
- Cool down, 5 Min.
Additional Recommendations:
- For Heavy Soiled Mats, increase temperature up to max. 60°C.
- Break should not exceed pH of 9,5; use low pH non-ionic detergents.
- Do not overdry mats; Basket-temperature of dryer should not exceed 82 °C.
- If mats are not dried, final rinse can be increased to 49 °C. This will reduce moisture retention following extraction.
- Lay mats flat following removal from washer; allow mats to cool before rolling.
