SureStride Directional Mats

Product Number 5466

SureStride Directional Mats are adhesive-backed mats designed to facilitate guiding customers, visitors and employees to follow defined routes.

PROVIDES CLEAR DIRECTION | Universal "stop sign" shape with directional arrows; mats can be placed at safe intervals in virtually any configuration.

STAYS IN PLACE | Adhesive backing keeps the mat flat and in place, even with heavy shopping cart and buggy traffic.

HASSLE FREE | Mats can be left in place during daily floor cleaning; floor scrubbers, mops, and brooms will pass right over them without causing damage.

WON'T LEAVE RESIDUE | Stick-and-Stand mats are less likely to leave a sticky residue than floor decals.

ODOUR RESISTANT | Anti-microbially treated for protection from odours.

SLIP RESISTANT | Low-profile high-traction surface provides additional traction and slip resistance.

Recommended for use in settings where specific routes need to be outlined.

Each mat is 43.2 x 43.2 cm.

Mats are sold in cases of 6.

  • SURFACE MATERIAL: Solution-dyed polypropylene, screenprinted
  • BACKING MATERIAL: Releasable adhesive; moisture barrier is a polyester film
  • OVERALL WEIGHT: 410g/m²


  • Certified high-traction by the National Floor Safety Institute (NFSI)
  • Passes flammability standard DOC-FF-1-71

Please do not pick up the mat to clean the floor underneath until you are ready to replace it.

  • Stick-and-Stand mats feature a low profile and can be left in place during daily floor cleaning activities.
  • Floor scrubbers, vacuums, brooms, and mops will pass right over it without causing damage to the mat. Standard floor scrubbers may be used to clean the mat. Use low settings for water and pressure, but note that extended use of floor scrubbers could result in the removal of the printed design.
  • Stick-and-Stand mats are designed to dissipate water and dry quickly, however, standard fans and floor blowers can be used to expedite drying.
  • For extremely wet conditions, use a wet vacuum or extractor to remove excess water.
  • Stick-and-Stand mats are designed to last up to 3-4 months under normal conditions. If the mats are installed in a high-traffic area or show signs of wear or a weakened bond to the floor prior to its intended life, it should be replaced.

  1. The floor must be clean and dry.
  2. Measure your desired distance between mats.
  3. Position the mat in the desired location, then press and smooth the mat into place.